2023 Schulte FLX-1510 Base

Information

2023 Schulte FLX-1510

Features may include:

  • Increase operator safety, comfort and performance with the revolutionary Schulte Flex-Arm.
  • The Schulte Flex-Arm allows the operator to travel on the road while the Schulte 10’ or 15’ rotary cutter cuts the ditch slope.
  • The tractor does not have to ride on the ditch slope so rollovers are very low risk. As an added bonus, wear & tear on the tractor is greatly reduced.
  • Operator comfort is greatly increased. Operators who have had a chance to use the Schulte FLEX-ARM say comfort & safety are the best features.
  • Visibility is improved. The operator is placed in a better position to view obstacles before they reach the rotary cutter.
  • The FLEX-ARM and Schulte cutter can be used in wet conditions, which could make cutting more difficult if the tractor had to ride on the slope.
  • Because of the unique way in which the FLEX-ARM is attached to the rotary cutter, it can be easily backed up to cut around approaches and other obstacles.

Photos

Highlights

  • Dauphin, Manitoba
  • 2023
  • Schulte
  • FLX-1510 Base
  • Available

Specifications

  • 2023
  • Schulte
  • FLX-1510
  • Base
  • General
  • 200HP
  • 11L x 15, 12 ply
  • Heavy duty 3-1/2 X 36 welded hydraulic cylinder | Minimum of 3 hydraulic circuits required to operate the FLEX ARM with a 15’ or 10’ mower
  • 1000 RPM
  • Arm & rotary cutter with stop block installed on the transport lock bar. 55” to the left of the tractor and 66” to the right. In this configuration the arm is 19” off center. The stop block can be installed when working on narrow roads to improve clearance for oncoming traffic. | Arm alone. 70” to the left of the tractor and 47” to the right for a total of 117” | Arm & rotary cutter. 70” to the left of the tractor and 52” to the right for a total of 121” | Cut directly in-line with the tractor or at any offset distance up to 122” (10.16ft) | Large 2-1/2” castor pivot shaft
  • 4000 lbs.
  • asily detached from the rotary cutter by disconnecting the hitch and the stabilizer strut | Bolt-in replaceable axles | Spring steel tension bushings and induction hardened pins at major pivot points
  • 2557 lbs
  • 6 bolt