2023 Schulte GX-130 Base

Information

2023 Schulte GX-130

Features may include:

  • A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents
  • water pooling, rusting and helps shed debris
  • An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive
  • system features a category 6 CV for 540rpm. The drive line on the cutter itself employs self-adjusting
  • friction clutches to protect your investment and always operate at peak performance
  • Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
  • A four gearbox drive line with independent slip clutches
  • Deck protection rings are standard and protect the cutter deck from rising blades
  • Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors
  • High flex wing working range of 25° down to 90° up

Photos

Highlights

  • Dauphin, Manitoba
  • 2023
  • Schulte
  • GX-130 Base
  • Available
  • Cutting: 1.75”-16.75” (45mm-425mm)

Specifications

  • 2023
  • Schulte
  • GX-130
  • Base
  • General
  • Tractor Size: 45hp (36kw)
  • Divider Gearbox Rating: 250hp (186kw) | Center & Wing Gearbox Rating: 130hp (97kw)
  • Blade Tip Speed 540 rpm: Center - 16,286 ft/min (4964m/min), Wing - 16031 ft/min (4886 m/min)
  • 540 CV: Cat 6 | Wing Drive Shafts: Cat 5
  • Cutting Capacity: 2.5” (89mm) | Blade Overlap: 6.5” (165mm) | Deck Thickness: .135” (10ga or 3.4mm) | Wing Working Range: 25° down to 90° up | Wing Floating Range: 25° down to 30° up
  • 13’ (3.96m)
  • 13.8’ (4.22m)
  • 16.8’ (5.13m)
  • Cutting: 1.75”-16.75” (45mm-425mm)
  • 93” (2.36m)
  • 72” (1.83m)
  • Side Skirt Depth & Thickness: 13.6” (346mm) 1/4” (6.4mm)
  • 1520 lbs (689 kg)
  • (Depends on Config.): 5050 lbs (2291 kg)