2023 Schulte GX-150 Base

Information

2023 Schulte GX-150

Features may include:

  • Our general duty 15 foot flex wing rotary mower.
  • A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris
  • An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm and the 1000 rpm is a category 5. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance
  • Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
  • A four-gearbox drive line with independent slip clutches
  • Deck protection rings are standard and protect the cutter deck from rising blades
  • Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors.
  • High flex wing working range of 25° down to 90° up
  • Solid laminated tires 20” or 26” or forklift tires available
  • 4, 6 or 8 tire options
  • Heavy duty 3/4” thick blade disc with 4” blades and pentagon blade bolts
  • Safety light kit
  • Pro Level hitch
  • 540 or 1000 RPM Drive package
  • Single chains front and rear
  • Gearbox sight glass
  • Heavy duty cast hinge line with wiper seals
  • Deck protection rings are standard

Photos

Highlights

  • Dauphin, Manitoba
  • 2023
  • Schulte
  • GX-150 Base
  • Available
  • Cutting: 1.75”-16.75” (45mm-425mm)

Specifications

  • 2023
  • Schulte
  • GX-150
  • Base
  • General
  • 50hp (37kw)
  • Divider Gearbox Rating: 260hp (194kw) | Center & Wing Gearbox Rating: 210hp (155kw)
  • Blade Tip Speed Wing 1000rpm: 15,708 ft/min (4788m/min) | Blade Tip Speed Center 1000rpm: 16,390 ft/min (4996m/min) | Blade Tip Speed Wing 540rpm: 15,459 ft/min (4711m/min) | Blade Tip Speed Center 540rpm: 16,286 ft/min (4964m/min)
  • 540 CV: Cat 6 | 1000 CV: Cat 5 | Wing Drive Shafts: Cat 5
  • Wing Floating Range: 25° down to 30° up | Wing Working Range: 25° down to 90° up | Cutting Capacity: 3.5” (89mm) | Blade Overlap: 6.5” (165mm) | Side Skirt Depth & Thickness: 13.6” (346mm) 1/4” (6.4mm)
  • 15’ (4.57m)
  • 15.8’ (4.83m)
  • 16.8’ (5.13m)
  • Cutting: 1.75”-16.75” (45mm-425mm)
  • 93” (2.36m)
  • 84” (2.13m)
  • thickness: .135” (10ga or 3.4mm)
  • 1,702lbs (772kg)